BA200: How to Perform Voltmeter

Introduction

Accurately measuring the voltage of a vehicle's battery is critical to maintaining its overall performance. The Voltmeter function on the Battery Tester Module operates similar to the DC voltage measurement on a Digital Multimeter DMM, providing continuous monitoring of the battery’s voltage. This function offers a reliable indication of the battery's voltage, ensuring the vehicle's electrical system stays in optimal condition. This article explains how to use the Voltmeter function on the Battery Tester Module.

Battery Tester Module device connected to a vehicle battery to measure voltage

Instructions

NOTE: Inspect the battery terminals for sulfate deposits and other corrosion. Use a brush to thoroughly clean the terminals before connecting the Battery Tester Module.

Step 1: Connect the test clamps to the battery terminals; red clamp to the positive terminal and black clamp to the negative terminal. Connect the Battery Tester Module with the RSPRO® App. Tap the Battery Tester Module.

Selecting Battery Tester Module in the RSPRO App

Step 2: When the Battery Tester Module has been paired successfully, tap Continue.

Bluetooth pairing success confirmation screen on RSPRO App

Step 3: Tap Battery Tester.

Tapping Battery Tester option in the RSPRO App main menu

Step 4: Tap Battery Voltmeter (12 Volt) on the Battery Tester Module menu.

Selecting Battery Voltmeter 12 Volt on Battery Tester menu

Step 5: The Voltmeter value is shown on the screen.

Voltmeter screen displaying real-time vehicle battery voltage

NOTE: If there are problems with the connection of the test clamps to the battery, an advisory message displays, indicating that the connection needs to be checked before trying again.


Video Reference

Have Questions?

Please do not hesitate to contact us for assistance.
Our U.S.-based customer service team is ready to assist you.